Ultraturb seawater sc, turbidity sensor, 50 m cable

ARTICLE OBSOLETE

Ultraturb seawater sc, turbidity sensor, 50 m cable
Réf. produit: LPV415.99.72001

ARTICLE OBSOLETE

Large measuring range: 0.0001 - 1,000 NTU

The Hach Ultraturb plus sc Sensor measures turbidity from 0 to 1000 NTU (FNU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-Cleaning Sample Chamber Option

The Ultraturb sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb seawater sc is resistant to salt concentrations up to 65 g/L.

Contenu de la boîte

Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual

Caractéristiques

Affichage: Display provided through connection with digital Hach SC Controller
Balayage automatique: Oui
Classe de protection du boîtier: IP55
Compatibilité du transmetteur: SC4500, SC1000, SC200
Contenu de la boîte: Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual
Débit de l'échantillon: 0.2 to 1 L/min
Dimensions (H x L x P): 240 mm x 250 mm x 110 mm
Entrée: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Garantie: 24 mois
Longueur de câble: 50 m
Matériel: Housing: ASA; Wiper Blade: Silicon; Wiper Shaft: Stainless steel 1.4571
Méthode d'étalonnage: Stablcal
Méthode de mesure: 90° infrared pulse scattered light technique in accordance with DIN EN ISO 7027
Modèle: Ultraturb seawater sc
Nettoyage électrodes: Wiper, automatic
Plage de mesure: 0.0001 - 1000 FNU freely programmable (0.0001 - 250 EBC = 2500 ppm SiO2)
Plage de pression: 6 bar at 20 °C (87 psi at 68 °F)
Plage de température: -10 - 40 °C (Display Unit)
Poids: Approx. 1.5 kg
Précision: ± 0.008 FNU ±1% of reading whatever is greater
(0 - 10 FNU)
Répétabilité: ± 0.003 FNU or ± 0.5% of reading (whichever is greater) from 0 - 2 FNU
Sortie: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Température de l'échantillon: Max. 50°C (122°F)
Temps de réponse: 1 - 60 s (programmable)
Vérification: Stablcal or dry standard CVM module