CL17 Chlorine Analyzer (Instrument Only)

ARTICLE OBSOLETE

CL17 Chlorine Analyzer (Instrument Only)
Réf. produit: 5440000

ARTICLE OBSOLETE

Analyses de chlore fiables et précises

The Hach CL17 Chlorine Analyser uses colorimetric DPD chemistry to monitor water continuously for free or total residual chlorine or permanganate. The CL17 is a simple, dependable and economical alternative to instruments that rely on electrodes or complex procedures. The CL17 analysis method is not affected by changes in chlorine concentration, sample pH, temperature, flow or pressure, thus offering more accuracy than other methods in today's market.

Simple, Predictable Maintenance

Both an alarm for manual chlorine feed control and a 4 - 20 mA output for automatic control of chlorine feed pumps is available in the CL17 Analyser. When set for manual control, the instrument notifies the operator of out-of-limit chlorine levels for manual intervention in the disinfection process as needed. For automatic control of chlorine feed pumps, the CL17 can use one of two methods: 1. On-Off Control turns the feed pumps on when chlorine levels fall too low for disinfection and off when levels rise above a pre-set limit. 2. Proportional Control adjusts the amount of chlorine in proportion to the strength of the CL17's output signal.

Factory Calibrated

Routine maintenance can typically be performed in 15 minutes per month because the sample cell and reaction chamber are easy to clean and the case provides quick access. (Difficult samples may require more frequent cleaning.) The CL17 is also equipped with self-testing diagnostics.

EPA Compliant

Free Residual Chlorine - The CL17 Chlorine Analyser uses an aqueous buffered colorimetric indicator - N,N-diethylphenylenediamine (DPD) - to determine levels of chlorine. DPD turns a magenta color in response to the amount of free residual chlorine (as hypochlorous acid or hypochlorite ion). The reaction takes place at a buffered pH of 6.3 - 6.6. Total Residual Chlorine - To measures total residual chlorine (free residual chlorine plus mono-, di- and trichloramines) an additional reagent is used. By adding potassium iodide to the sample, chloramines in the sample oxidize iodide to iodine, which then oxidizes the DPD indicator to the magenta colour at a buffered pH of 5.1.

Pump Control

Contenu de la boîte

CL17 Chlorine Analyser, Maintenance kit, Installation Kit, and Manual. (The power cord is ordered separately.)

Caractéristiques

Accessoires: Aucun
Accessoires inclus: Aucun
Affichage: LCD, Afficheur digital 3.5 pouce de six-caractères alphanumeriques
Alarme: Deux alarmes sélectionnables comme la concentration de l'échantillon, défaut de l'analyseur, ou l'arrêt de l'analyseur. Chaque sortie est équipée d'un relais SPDT pour des charges résistives de 5A à 230 V AC.
Boîtier : Plastique ABS, deux fenêtres polycarbonate, IP62 avec porte vérouillable
Certifications: Europe, CE Approved with:
EN 61326-1
CISPR 11
EN 61010-1
IEC 60529

Etats Unis:
UL 61010A-1
CAN/CSA C22.2 No. 1010.1-92
Contenu de la boîte: CL17 Chlorine Analyser, Maintenance kit, Installation Kit, and Manual. (The power cord is ordered separately.)
Débit d'échantillonnage: 200 à 500 mL par minute minimum
Débit de l'échantillon: 200 à 500 mL par minute minimum
Description: CL17 Chlorine Analyzer (Instrument Only)
Drain: Flexible 1/2 pouce, embout cannelé
Durée d'analyse: 2.5 min
Entrée: 1/4 Tube polyethylène, raccord rapide
Garantie: 24 mois
Humidité de fonctionnement: Jusqu'à 90 % - 40 °C (104 °F) maximum
Inclus: CL17 Chlorine Analyser, Maintenance kit, Installation Kit, and Manual. (The power cord is ordered separately.)
Interférences: Autres agents oxydants tels que bromide, dioxide de chlore, le permanganate et l'ozone entraîneront des interférencesl. Le chrome hexavalent causera des interférences positives: 1 mg/L Cr⁶⁺ = approximativement 0.02 mg/L de Cl₂. La dureté de l'eau ne doit pas dépasser 1,000 mg/L de CaCO₃.
Limite de détection: 0.03 mg/L (ppm)
Montage: Montage mural
Moyens de communication: 4-20 mA output
Paramètres: Chlorine, Free & Total
Plage de mesure: 0 - 5 mg/L Chlore résiduel libre et total
Plage de pression: Entrée pression pour le conditionnement de l'échantillon: Jusqu'à 75 psi (0,1 bar à 5,2 bar)
Plage de température: 5 - 40 °C (41 - 104 °F)
Poids: 10,49 kg
Précision: ± 5 % ou ±0,03 mg/L (ppm) de CL₂, la valeur la plus grande
Pression d'entrée: 1 à 5 psig (0.07 à 0.34 bar), 1.5 psi est optimum
Pressure Regulator Included?: No
Purge d'air: 0.1 cfm (0.17 m³/h) qualité de l'air instrument à 20 psig maxi (ca. 1.4 bar) avec un raccord rapide pour tuyau 1/4 pouce
Répétabilité: 0.01 ppm ou 3.0 % La valeur la plus grande
Sorties d’enregistreur: Une sortie analogique 0/4-20 mA avec possibilité de programmer des pentes entre 0 et 5 mg/L. Impédance recommandée 3.6 à 500 ohms, isolement à la terre 130 V
Source de lumière: Classe 1 LED avec pic de longueur d'onde à 520 nm; durée de vie minimum 50,000 heures
Température de l'échantillon: 5 - 40 °C (41 - 104 °F)