Turbidimètre en ligne ULTRATURB eau de mer 30m de câble

ARTICLE OBSOLETE

Turbidimètre en ligne ULTRATURB eau de mer 30m de câble
Réf. produit: LPV415.99.62002

ARTICLE OBSOLETE

Large measuring range: 0.0001 - 1,000 NTU

The Hach Ultraturb plus sc Sensor measures turbidity from 0 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-cleaning Sample Chamber Option

The Ultraturb sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb seawater sc is resistant to salt concentrations up to 65 g/L.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system.

The Ultraturb sensor can be used with Hach's SC200 and SC1000 Digital Controllers. The SC200 controller accepts up to two sensors. The SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach "plug and play" digital sensor and its ready to use without software configuration. Plug and play connectivity means there's no complicated wiring or set up. Network the Ultraturb sensor with any of Hach's digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.

Contenu de la boîte

Hach Ultraturb sc, certificat de test d'usine, 4 essuie-glaces, set d'accessoires LZP816, manuel d'utilisation

Caractéristiques

Affichage: Transmetteur numériques SC200 ou SC1000
Balayage automatique: Oui
Coefficient de Variation: en accord avec la norme DIN38410
Contenu de la boîte: Hach Ultraturb sc, certificat de test d'usine, 4 essuie-glaces, set d'accessoires LZP816, manuel d'utilisation
Débit de l'échantillon: 0.2 to 1 L/min
Dimensions (H x L x P): 240 mm x 250 mm x 110 mm
Entrée: Tuyau 13 mm DI ou connecteur (système en PVC)
Longueur de câble: 30 m
Matériel: Housing: ASA; Window: Quartz; Wiper Blade: Silicon; Wiper Shaft: stainless steel 1.4576
Méthode d'étalonnage: Stabcal ou module solide CVM
Méthode de mesure: Technique lumière IR pulsée à 90° suivant la norme DIN EN ISO 7030
Modèle: Ultraturb seawater sc
Nettoyage électrodes: Wiper, automatic
Plage de mesure: 0.0001 - 1000 FNU Programmable librement (0.0001 à 250 EBC = 2500 ppm SiO2)
Plage de pression: 6 bar at 20 °C (87 psi at 68 °F)
Plage de température: -10 - 40 °C (Afficheur)
Poids: Approximativement 1.5 kg
Précision: ± 0,008 FNU ±1% de la valeur la plus grande
(0 à 10 FNU)
Répétabilité: ± 0.003 FNU ±0,5% de la lecture(0 à 2 FNU)
Sortie: Tuyau 13 mm DI ou connecteur (système en PVC)
Température de l'échantillon: Max. 50°C (122°F)
Temps de réponse: 1 - 60 s (programmable)
Vérification: StablCal ou étalon solide CVM